Networking Windows

Adding IP’s to Windows Server 2012

This article will help you add one or more IP’s to windows server 2012.


To start, look on the bottom right of the your display to find a icon that looks like a monitor with a cable next to it:




Right click this icon and than select Open Network and Sharing Center:



After this, select Change adapter settings on the left sidebar:


This will open the Network Connection window. Right click the Ethernet Adapter you would like to add your IP and/or IP’s and select Properties:




Once Ethernet Properties window has opened, you highlight Internet Protocol Version 4 (TCP/IPv4) and then select Properties:




The Internet Protocol Version 4 (TCP/IPv4) Properties will open. After this select click on Advanced…



Under Advanced TCP/IP Settings, select Add…



You will get a pop-out that you let you enter the IP address and the Subnet mask for the network interface card you have selected:



After you have completed entered your networking information select Add. You can repeat this process to continue adding IP’s that are available to you.




Related Articles

  • Citrix Xen VM Unresponsive, Will not shut down or start

      If you have ever worked with Citrix Xenserver for a long time, You have no doubt experienced having a VM turn unmanageable. Below are couple of scenarios and quick...
  • Using MTR

    MTR is a powerful network diagnostic tool that enables administrators to diagnose and isolate networking errors and provide helpful reports of network status to upstream providers. MTR represents an evolution...
  • Add IP to CentOS 5/6

    If you recently got a secondary IP block for your server but you do not know how to bind the secondary IP address, please follow the steps below:   First, run...
  • Check IP’s Hitting Server

    Let’s say your website is running pretty slow and you think it may be an attack of some sort, you can run the following commands to get a nice and...